Shock Shield GFCI In-Line Cord Sets 120V/30A and 240V/30A

Designed for rugged duty. Molded from high impact polymer with booted reset and test buttons. At home in hostile environments such as industrial, construction, maintenance and commercial work sites. Provides compliance with National Electric Code (NEC 2008) Article 590.6 for "Temporary Installations".
Applications include:

  • High Pressure Sprayer Washers
  • Construction Site Power Tools
  • Drain Snakes
  • Pumps
  • Construction Sites
  • Industrial Appliances

Rainproof rated, UL listed for outdoor use. Standard lengths: 2', 6', and 25' with corresponding locking connectors. Custom cable gauges, lengths and terminations available by special order. To prevent unmonitored equipment startup, manual reset is required after GFCI trip and power outage.

Part Numbers & Features

44700-004 (2') GFCI
44700-005 (6') GFCI
44700-006 (25') GFCI
  • Volts/Amps: 120V/30A
  • Cord Gauge: 10/3 AWG
  • NEMA L5-30 P&R
  • Trip Level: 4-6 mA
44720-012 (3') GFCI
44720-013 (6') GFCI
44720-020 (25') GFCI
  • Volts/Amps: 240V/30A
  • Cord Gauge: 10/3 AWG
  • NEMA L6-30 P&R
  • Trip Level: 4-6 mA

Technical Data

Grounded Neutral 4 Ohms typical
Trip Response Time for Ground Fault and Grounded Neutral Trip less than 25mS
Voltage Surge Withstand 3kv ringwave test and 4kv/2kA surge immunity test
Radio Frequency Noise Susceptibility operates within normal limits with 0.5 volts injected on power line 150kHz-230mHz
Frequency 50/60 Hz
Endurance 3,000 operations minimum
Overload Current six times rated current
Operating Temperature Range -35°C to +66°C
Effect of 10 Amp turn DC Shock on Ground Fault Trip 5% maximum trip level variation
Insulation Voltage 1500 VRMS - 1a Min.
Power On Indication mechanical indicator, red stripe on reset


Drawings & Measurements

Print Print | Sitemap
© Milspec Industries, Inc.