HD Pro Series 6.10.30 60A GFCI/ELCI

HD-Pro 6.10.30 60A GFCI/ELCIs 208-240V/30A & 60A, 277V/30A and 480V/30A & 60A

Configured for both in-line and bulk head mount. Engineered to trip within 25 milliseconds.
Protects:

  • Motors
  • Manufacturing Equipment
  • Pumping Systems
  • Welders
  • Pressure Washers
  • Hoists

Has 2' of cable on both line and load side. To prevent equipment startup after GFCI/ELCI trips, manual reset required. Will reset on power restoration following the disruption of primary power 6.10.30 key enables trip level selection and locking at a trip level with key removal.

Part Number & Features

24396-001 GFCI
  • Volts/Amps: 277V/30A
  • Cord Gauge: 10/3 AWG
  • Trip Level: 6,10 & 30 mA
  • Single Phase
24672-001 GFCI
  • Volts/Amps: 480V/60A
  • Cord Gauge: 4/4 AWG
  • Trip Level: 6, 10 & 30 mA
  • Three Phase
24542-001 GFCI
  • Volts/Amps: 208-240V/60A
  • Cord Gauge: 4/4 AWG
  • Trip Level: 6, 10 & 30 mA
  • Three Phase
24846-001 GFCI
  • Volts/Amps: 208-240V/30A
  • Cord Gauge: 8/5 AWG
  • Trip Level: 6,10 & 30 mA
  • Three Phase
24646-001 GFCI
  • Volts/Amps: 480V/30A
  • Cord Gauge: 10/4 AWG
  • Trip Level: 6, 10 & 30 mA
  • Three Phase

Technical Data

Response Time for Ground Fault 25mS - typical
Frequency 50/60 Hz
Endurance 3,000 operations minimum
Overload Current six times rated current
Operating Temperature Range -20°C to +40°C
Insulation Voltage 1500 VRMS - 1 Min.
Power On Indication lighted indicator
Drop Out Voltage 60% rated voltage - typical
Reset Type Auto
Connection Type Flying Leads
Enclosure NEMA 4 Polymer

 

Drawing & Measurements

Print Print | Sitemap
© Milspec Industries, Inc.